SUMILON at the Yarn and Fabric Sourcing Show 2026: An 18 m² Stand on a Three-Day Clock

This textile exhibition stand for SUMILON was approved, produced and installed on one of the tightest timelines we have run: a few days from approval to the hall, and a single day on site. Lire cette étude de cas en français.

Client SUMILON (Sumilon Industries) · Show Morocco International Yarn & Fabric Sourcing Show 2026, alongside Textech Morocco and Dye+Chem Morocco · Venue Foire Internationale de Casablanca (OFEC) · Dates 3–5 November 2026 · Area 18 m² (6 × 3 m), stand B19–B20 · Sector Yarns, films and technical textiles

Finished SUMILON exhibition stand B19–B20 at the Yarn and Fabric Sourcing Show 2026, OFEC Casablanca: 18 m² white and red stand with lit red display shelves, 3D Sumilon logo, yarn graphics, meeting table and branded reception counter, built by Echo Expo.
Stand B19–B20, finished and lit on build day, 2 November 2026.

▶ Watch the build film on YouTube

A textile exhibition stand on a three-day clock

SUMILON confirmed its stand only days before the Yarn and Fabric Sourcing Show. The technical design was signed off. However, the exhibitor manual left no slack: one build day, 2 November, from 00:00 to 23:00, with the doors opening at 10:00 the next morning. As a result, production, graphics, shipping and installation all had to fit into the same few days.

In fact, it is the same discipline behind our three EVS Mobility Expo stands built in a single day in this hall a week earlier: every part made and finished in the workshop, then assembled on site in the order it was drawn.

From render to a finished textile exhibition stand

In the end, the finished stand follows the approved render closely: the white tower with the 3D logo and red display cubes on the left, the yarn graphics across the back wall, and the angled red wing with lit shelves framing the reception counter.

Design render of the SUMILON exhibition stand B19–B20 for the Yarn and Fabric Sourcing Show 2026 at OFEC Casablanca: 18 m² (6 × 3 m) in white and red with a raised grey floor, reception counter, meeting table and product display wall, by Echo Expo.
The approved render.
Corner view of the SUMILON stand at the Yarn and Fabric Sourcing Show 2026 in Casablanca: the angled red wing with lit shelves frames the reception counter and the gold metallic-yarn graphics, by Echo Expo.
In comparison, the same angle on build night.

What the design asked for

Element As designed
Area 18 m², 6 × 3 m, stand B19–B20
Floor 40 mm raised floor with grey carpet
Walls White paint finish with red feature panels in RAL 3020, about 3.35 m high
Branding 3D SUMILON logo and large-format posters across the back and side walls
Display Lit red display shelves and a product wall for the film and yarn range
Furniture Branded reception counter, meeting table with chairs, worktop and a lockable cabinet

Why white and red

SUMILON’s range is about surface: metallic yarns, holographic and metallised films. Therefore the stand stays mostly white, so the products and the big yarn imagery carry the colour. At the same time, one red wing on the corner pulls visitors in from the aisle and frames the reception counter.

Build day, 2 November

First, the walls and display shelving of this textile exhibition stand were cut and pre-assembled in our workshop. As a result, the day on site was assembly and finishing. Then the crew started on an empty floor, raised the timber frame and walls and finished the white and red surfaces. Finally, they fitted the lighting, graphics and furniture.

Echo Expo workshop: prefabricated timber panels and display shelving for the SUMILON stand before shipping to OFEC Casablanca, October 2026.
First, in the workshop: panels and shelving made before the show.
Empty hall at OFEC Casablanca on build day, 2 November 2026, before the SUMILON stand went up for the Yarn and Fabric Sourcing Show.
Then, on build day, the empty hall.
Build day at OFEC Casablanca: the timber frame and walls of the SUMILON stand going up on the raised floor, 2 November 2026.
Next, the timber frame goes up.
SUMILON stand under construction: raw timber walls and display shelving in place, Echo Expo crew working on build day in Casablanca.
After that, walls and display shelving in place.
SUMILON stand during the build: white walls and the red RAL 3020 wing with lit shelves finished, furniture arriving, OFEC Casablanca.
Then the white and red finish, with the shelves lit.
Echo Expo crew installing the large-format yarn graphics on the SUMILON stand on build day, Yarn and Fabric Sourcing Show 2026, Casablanca.
Finally, the graphics go on.

The finished textile exhibition stand

Front view of the 18 m² SUMILON textile exhibition stand at OFEC Casablanca, November 2026: white tower with red lit display cubes, meeting area and reception counter.
Front view.
SUMILON stand B19–B20 seen from the aisle at the Morocco Yarn and Fabric Sourcing Show 2026, with ceiling spotlights on the red feature wall and product graphics, built by Echo Expo.
Similarly, the stand seen from the aisle.
White display tower of the SUMILON stand with the 3D Sumilon logo, lit red cubes and a plant, Yarn and Fabric Sourcing Show 2026, Casablanca.
The display tower with the 3D logo.
Meeting area inside the SUMILON exhibition stand: round table with white chairs under the red canopy and lit shelves, OFEC Casablanca 2026.
The meeting area under the red canopy.

The OFEC rules that shaped it

Planning a textile exhibition stand at OFEC? First, read our guide to Textech, Yarn & Fabric and Dye+Chem Morocco 2026, our textiles and materials exhibition stand builder page and our exhibition stands in Morocco. Then send us your booth number.