Home / Elec Expo Stand Builder
Elec Expo Stand Builder
Exhibition Stands for Elec Expo, Ener Event and Tronica Expo at the Casablanca Fairground (OFEC) — 25–28 November 2026
This autumn, three shows open together at the Foire Internationale de Casablanca (OFEC) from 25 to 28 November 2026. Elec Expo covers electricity, lighting, electrical engineering and industrial automation. Ener Event covers renewable energy and energy efficiency. Tronica Expo covers electronics and components. In fact, all three are organised by FENELEC, the Moroccan federation for the electrical, electronic and renewable energy sectors, which has more than 650 member companies.
For 2026, Italy is Guest of Honour, and the Italian Trade Agency (ICE) is organising an Italian national pavilion. As an Elec Expo stand builder, Echo Expo works from Milan and Casablanca, so Italian exhibitors can brief us in Milan and have the stand built by our own workshop a short drive from the fairground.
Elec Expo 2026 at a Glance
| Shows | Elec Expo (electricity, lighting, automation) · Ener Event (renewable energy, efficiency) · Tronica Expo (electronics) |
|---|---|
| Dates | Wednesday 25 to Saturday 28 November 2026 |
| Venue | Foire Internationale de Casablanca (OFEC), Casablanca, Morocco |
| Organiser | FENELEC, 650+ member companies |
| Guest of Honour 2026 | Italy, with a national pavilion organised by ICE, the Italian Trade Agency |
| Market context | Morocco aims for more than 53% of its installed electricity capacity to come from renewables by 2030 |
| Official sites | elecexpo.ma · enerevent.ma · tronica-expo.ma |
Sources: the Italian Trade Agency (ICE) event notice for the 2026 Italian pavilion and the FENELEC show sites, checked on 30 October 2026. Confirm build times in the organiser’s exhibitor manual.
One Hall, Three Audiences
Because the three shows run side by side, the visitor on your stand might be a utility engineer, a solar installer, a panel builder or an electronics buyer. In short, that mix is the strength of the event: a smart-building or automation company meets all of them in one place.
However, it also means your stand has to explain itself quickly. So we design around one clear message on the fascia, the products at hand height, and a demo or a working panel where the engineer can see the detail. For example, lighting companies get a stand that shows their fittings working, with dimmable zones instead of a flat wash.
What an Elec Expo Stand Builder Plans For: Power, Panels and Weight
- Real electrical loads. For instance, switchgear, inverters, chargers and lighting demos need proper power. We specify the connection with you and wire the stand to it, with distribution boards inside the build.
- Weight. Likewise, transformers, cable drums and battery racks are heavy. Raised floors and plinths are built for the load and the delivery route.
- No fixing into the hall. Also, at OFEC stands are freestanding: no drilling, screwing or painting on the hall floor, walls or pillars. Our walls and floors stand on their own.
- Fire safety. In addition, all materials are fire-rated, as the organisers require.
An Elec Expo Stand Builder a Few Minutes from the Hall
Moreover, our workshop is in Casablanca, so stands for OFEC are built, checked and pre-assembled before they cross the city. In the same way, we built three stands for the Africa EV Mobility Expo in a single build day in October 2026, and the 792 m² China pavilion at SIEMA Food Expo earlier the same year.
Similarly, for the Italian pavilion and Italian exhibitors, our Milan office can meet you in person, draw the stand and manage the project in Italian, while Casablanca builds it.
More Shows at OFEC This Season
Finally, Elec Expo is one of several shows at the fairground this autumn: Textech, Dye+Chem and the Yarn and Fabric Sourcing Show (3–5 November), Préventica Casablanca for workplace health and safety (10–12 November), then Elec Expo, Ener Event and Tronica Expo (25–28 November). See our OFEC Casablanca venue guide for the full calendar and the venue rules.
Frequently Asked Questions
When is Elec Expo 2026?
Elec Expo, Ener Event and Tronica Expo run together from 25 to 28 November 2026 at the Foire Internationale de Casablanca (OFEC) in Casablanca, Morocco.
Who organises Elec Expo?
FENELEC, the Moroccan federation for the electrical, electronic and renewable energy sectors, with more than 650 member companies.
Which country is Guest of Honour in 2026?
Italy. Furthermore, the Italian Trade Agency (ICE) is organising an Italian national pavilion at the three shows.
Can an Elec Expo stand builder work with Italian exhibitors?
Yes. Echo Expo has an office in Milan and a workshop in Casablanca, so Italian exhibitors can brief us in Milan and have the stand built locally in Morocco.
Can my Elec Expo stand builder wire a live electrical demo?
Yes. First, we plan the power connection with you and wire the stand with its own distribution inside the build, so switchgear, chargers and lighting can run live.
Can you fix the stand to the hall floor or walls?
No. Instead, at OFEC stands must be freestanding, with no drilling, screwing or painting on the hall. Our floors and walls are built to stand on their own.
Need an Elec Expo stand builder, or a stand at Ener Event or Tronica Expo? Request a stand quotation with your stand number, or read about our exhibition stands in Morocco. See every 2027 date on our Morocco trade show calendar 2027.