Exhibition Stand Design Germany

We build across Germany’s principal exhibition grounds. At Messe Frankfurt we delivered a 40 m² stand at Heimtextil, stand 4.0 B38 (14–17 January 2025), and two builds at Fi Europe — 36 m² plus 18 m². At Deutsche Messe Hannover we built 28 m² at EuroTier, booth F05 (12–15 November 2024). Two Messe venues inside three weeks in November 2024, in different cities.

We also build for industrial and metal-cutting fairs at Messe Essen — see our exhibition stand build for Schneiden 2025 in Essen.

Whether you are exhibiting at a technology, manufacturing, healthcare, automotive, logistics, energy or consumer products event, a professionally designed stand significantly improves visitor engagement and brand visibility.

Every stand we have built in Germany

Fourteen builds across seven German cities. Every area below is taken from a signed contract or the venue’s own stand documentation.

Three stands, one show, one crew

At Fi Europe in Frankfurt we delivered three stands for three different exhibitors at the same edition — 36 m², 32 m² and 18 m², 86 m² in total. Three sets of hall paperwork, three build slots, three deliveries into the same loading bays, and one crew that had to be in three places without any of them slipping.

German halls are unforgiving, and that is the point

Messe Frankfurt, Koelnmesse, NürnbergMesse, Messe Düsseldorf and Deutsche Messe run some of the most tightly regulated build-ups in the world. Rigging approval, floor loading, electrical load declarations and waste separation are not paperwork you catch up on later — a missing document is refusal of access, not a fine.

That suits a contractor who does the work themselves. It is very hard on one who has handed your drawings to whoever was cheapest in that city.

Frankfurt

CPHI, ISH, Heimtextil, Ambiente and Fi Europe. Seven of our fourteen German builds are at Messe Frankfurt, which means we know which halls run low, where the goods lifts bottleneck and how long a rigging approval actually takes.

Hamburg

Aircraft Interiors Expo at 135 m², hall B5, booth 5A40 — our largest German stand, an aviation interiors build — and 34 m² at the EASD diabetes congress.

Cologne

76.5 m² at interzum 2025: custom paint finish, a suspended halo sign and a 1.5 × 2 m LED wall built into the outside face of the lounge, on a plot where every neighbour sells surfaces for a living.

Nuremberg and Düsseldorf

30 m² at the European Coatings Show 2025 in Nuremberg for a first-time European exhibitor, and 33 m² at A+A 2025 in Düsseldorf, the world’s largest safety and PPE event.

Why an Italian workshop matters for a German show

Corsico is twenty minutes from Fiera Milano Rho and within a day’s drive of Frankfurt, Cologne and Düsseldorf. We build the stand, load it and drive it ourselves. There is no handover to a local contractor who has never seen the drawings, and nobody between you and the people who made it.